Thickness — 5.4 mm vs 3 mm
CR2354 is 5.4 mm thick; CR2330 is 3 mm. Holders are built for one stack height. The thinner cell loses spring pressure (“works only when I press the cover”). The thicker cell jams the door or bends the clip.
CR2354 vs CR2330
Same 23 mm diameter family. CR2354 is 5.4 mm thick; CR2330 is 3.0 mm thick. Capacity and door clearance both change with height.
Last verified Aug 25, 2026
Not interchangeable — match the height printed on your old cell.
A CR2330 vs CR2354 swap fails on thickness, capacity. If the door only closes when you force it, or the device works only while you press the cover, you have the wrong cell — not a weak spring you should ignore.
They share 3 V and LiMnO2 and 23 mm diameter, which is why CR2354 vs CR2330 looks interchangeable on a store shelf. Highlighted rows are the ones that change the purchase: thickness, capacity.
Read physical fit before capacity. Extra milliamp-hours only help when the holder is built for that cell. A “better” spec in the wrong tray is a mechanical or voltage mismatch, not an upgrade.
If you searched CR2330 vs CR2354, you are on the same comparison with the names reversed. The difference between CR2354 and CR2330 batteries is not the word “vs” — it is the specs that do not match after you ignore the similar photos.
CR2354 is 5.4 mm thick; CR2330 is 3 mm. Holders are built for one stack height. The thinner cell loses spring pressure (“works only when I press the cover”). The thicker cell jams the door or bends the clip.
Typical CR2354 capacity is 520–560 mAh. CR2330 is 255–280 mAh. Runtime only follows that gap inside the correct holder. Extra capacity in the wrong tray does not last longer — it often does not run at all.
Shared ~23 mm diameter
CR2354 stores more energy; CR2330 fits thinner doors
Coin and button codes are rulers, not brand slogans. The letters mark chemistry class. The digits encode size. CR2354 measures 23 × 5.4 mm; CR2330 measures 23 × 3 mm. Once you read the code that way, CR2330 vs CR2354 stops looking like a preference and starts looking like a fit check.
Usually no. CR2354 is 23 × 5.4 mm at 3 V (LiMnO2). CR2330 is 23 × 3 mm at 3 V (LiMnO2). Those are not the same part.
If the spent cell or tray said CR2330, specify that code. Forcing CR2354 can crack a cover, lose contact, or apply the wrong voltage.
Usually no. Going the other way does not fix a diameter, thickness, or voltage miss. CR2330 in a CR2354 holder has the same problem with the names flipped.
If you arrived from a CR2330 vs CR2354 search, stay on this page. The answer does not change.
Retail packs hide the IEC size behind house codes. CR2354 also appears as DL2354, ECR2354. CR2330 also appears as DL2330. Those prefixes do not change the outline unless the chemistry letters change (BR, LIR, ML, PR).
You do not need a full datasheet to settle CR2354 vs CR2330. You need the stamp, the tray, or a cheap pair of calipers. A store bin labeled only “button cell” or “3V lithium” will not do that work for you.
Same rule as CR2430/CR2450: diameter match is not enough.
Do not stack cells, grind a can, or use foil as a permanent spacer to fake CR2330 with CR2354. Read the stamp, then the spec table. If the door will not close without force, you have the wrong height or diameter.
IEC coin codes encode size. The last digits track height; the first digits track diameter.
Yes. CR2354 vs CR2330 and CR2330 vs CR2354 are the same pair. Fit, voltage, and chemistry do not change when you flip the order.
Use this guide as a starting point, then confirm voltage, chemistry, and physical size with your device manual or the marking on the old cell.
Reviewed by PlainBattery Technical Review Desk on 2026-08-25. Checked: both model identities and dimensions, voltage and chemistry differences, physical fit, interchangeability conclusion and safety warnings.
Revision record: source citations and field-level review scope added September 11, 2026. See our sources and methodology and corrections policy.